How to Refinish Metal File Cabinets

HOW TO Make A METAL FILING Cabinet Fabled

FilingCabinetLifestyle

From humdrum to fashion frontward, we've put this filing cabinet through a Brand Information technology Yours makeover and given it a new lease of life.

Although we're talking office article of furniture hither, that doesn't take to hateful plainly and dull. We think in that location's nothing wrong with a little bit of style in the workplace and hope yous agree.

Every bit you well know, the other option and one we love, is to break the mould and transform a bog-standard item into a slice yous'd mayhap desire to put where you'd least await. For example, we're going to show you how a filing cabinet might as well become the next beautiful side tabular array in your living room.

FilingCabinetHandleCloseUp

We've followed the latest trends in manner and paired marble with metallic to create a stunning contrast. Painting the base black adds an actress edgy look.

If you desire to find out how to transform your own filing cabinet, follow the steps beneath to reach upcycle utopia.

FilingCabinetHandleCloseUp2

Steps

Disassemble

If you can, start by removing the drawers where possible. And so remove the handles; in this case the handles popped out, however some may need to exist unscrewed.
CLEAN

Wipe all the surfaces downward with a clammy cloth to ensure the cabinet is complimentary from grit and grease.
Tip: For the best results when cleaning, utilise Zinsser Krud Kutter. This will ensure your piece is free from contaminates and provide a good surface to pigment.
PAINT

Open your can of Rust-Oleum Satin Cease Article of furniture Pigment in Carbon and requite information technology a good stir. Then, pour a small corporeality into a paint tray, load up the cream roller and begin to paint the outside frame of the filing chiffonier.

Once the first glaze is dry, apply an additional second coat to achieve an even finish.
DRAWER FRONTS

If your drawers can't be removed, like ours, have your marble gummy dorsum plastic and measure upward against the drawer how much yous'll need. Give yourself around an inch actress on all iv sides and mark with a pencil.

If yous're able to remove the drawer, whorl out the marble gluey dorsum plastic onto a hard, apartment surface and place the first drawer face down onto it, positioning it in between the filigree guidelines. Mark with a pencil round all four sides, again giving an inch from the edge of the drawer – this will course the cut guideline.
Cut

Follow your pencil marks and cut out the shape of the drawer front using scissors.
Awarding

Peel the backing paper abroad slightly at one side of the marble viscous back plastic and use to the respective edge of the drawer forepart.

Once this is securely applied, start to pull the backing newspaper away slowly, smoothing as you lot go.

Tip: For best results use a card to smooth the plastic out, this will prevent air bubbles from occurring.
EDGES

One time the drawer front is covered, plough your attention to the edges. Carefully fold these over, making neat folds at the corners and trim the excess. Echo this process for the two remaining drawers.

Tip: If yous find yous have some stray bubbling in the plastic, take a pivot and insert it into the bubble to release the air. Apply the card and so smooth the bubble out.
CUT Hole FOR HANDLES

In grooming for reattaching the handles, apply your scissors to create a cross where the handle area is. Then carefully fold the pasty dorsum plastic over and so your handles can be fitted.
FINISHING TOUCHES

Place the handles onto a dust sheet or newspaper and apply a glaze of Rust-Oleum Surface Primer to prepare the surface. In one case this has dried, employ 2 coats of Rust-Oleum Metallic Brilliant Gold and leave to dry in between coats.
Attach HANDLES

Re-attach the handles to each drawer and identify the drawers dorsum into the frame.
FINISHING TOUCHES

Fill up to the brim with stationery goodies or magazines and manner accordingly. Who said that role furniture couldn't be beautiful?